CAFé VII

Nowy Styl Selection

Cafe VII

Cafe is a wide range of cafe chairs made of profiled plywood. The use of high quality materials and carefully chosen finishes add a unique character to the whole line.

The unique shapes of the Cafe line are sure to catch everyone's attention! A unique combination of exceptional design and top quality materials – this is the recipe for a sensual and energising project.

Benches

The Cafe VII bench is available as a 3- or 4-seater version:

  • shell made of contoured beech plywood, optionally with upholstered pads on seats and backrests (PLUS version)
  • available in standard wood stains and laminate
  • steel base, chromium-plated legs, ALU powder-coated beam

Benches from the Cafe VII line are perfect choice for waiting areas, as well as for school and university corridors.

Stacking:

  • 4L / 4L ARM WOOD – 4 pieces, 
  • 4L / 4L ARM A-PLUS; B-PLUS, SEAT PLUS, PLUS – 4 pieces (only with an additional stacking cushion), 
  • 4L B-PLUS SQ, SEAT PLUS, PLUS – 8 pieces (only with an additional stacking cushion),
  • CFS ROD A-PLUS; B-PLUS; PLUS; SEAT PLUS – 4 pieces (only with an additional stacking cushion),
  • CFS ROD WOOD – 10 pieces.

Seat and backrest

WOOD version – shell made of 8-layer contoured beech plywood (10.5 mm thickness) available with a wooden seat and backrest.
PLUS version – shell made of 8-layer contoured beech plywood (10.5 mm thickness), upholstered seat and backrest pads made of beech plywood (4.5 mm thickness) and covered with foam with a density of 25 kg/m3, 10 mm thickness (seat) and of 25 kg/m3, 10 mm thickness (backrest); wooden backrest back.
SEAT PLUS version – shell made of 8-layer contoured beech plywood (10.5 mm thickness), upholstered seat pad made of 4-layer beech plywood (4.5 mm thickness) and covered with foam with a density of 25 kg/m3, 10 mm thickness; wooden backrest back.
A PLUS version – shell made of 8-layer contoured beech plywood (10.5 mm thickness), upholstered on both sides. Front: foam with a density of 25 kg/m3, 20 mm thickness; back: foam with a density of 25 kg/m3, 10 mm thickness.
B PLUS version – shell made of 8-layer contoured beech plywood (10.5 mm thickness); seat and backrest front fully upholstered; seat and backrest pad made of plywood (4.5 mm thickness) and covered with foam with a density of 25 kg/m3, 25 mm thickness; wooden backrest back.
Up&Down WOOD version – seat made of 7-layer beech plywood (9 mm thickness).
Up&Down A PLUS version – seat made of 7-layer beech plywood (9 mm thickness), upholstered on both sides. Front: foam with a density of 25 kg/m3, 20 mm thickness; back: foam with a density of 25 kg/m3, 10 mm thickness.
HOCKER WOOD version – seat made of 7-layer beech plywood (9 mm thickness).
HOCKER A PLUS version – seat made of 7-layer beech plywood (9 mm thickness), upholstered on both sides. Front: foam with a density of 25 kg/m3, 20 mm thickness; back: foam with a density of 25 kg/m3, 10 mm thickness.

Wooden elements are available in wood and laminate finishes determined by the valid offer.

Frame

Stable chromium-plated or powder-coated metal frame available as:

  • 4L version: legs, Ø 16 × 2.0 mm steel tube + seat-fixing metal sheet (3 mm thickness),
  • 4L ARM version: legs, Ø 16 × 2.0 mm steel tube, armrests, Ø 18 × 2.5 mm tube + seat-fixing metal sheet (3 mm thickness),
  • 4L SQ version: 20 × 20 × 1.5 mm steel tube + seat-fixing handle (3 mm thickness),
  • Hocker version: Ø 18 × 1.5 mm steel tube,
  • Up&Down version: Ø 60 mm steel tube, Ø 470 mm base feet (8 mm thickness); the whole version covered with a chromium-plated galvanic coating,
  • CFS Rod version: Ø 11 mm steel bar, 5 × 25 mm flat bar,
  • GTS version: 5-star base made of polished aluminium,
  • set of CAFE-3 / CAFE-4 benches: steel leg covered with a chromium-plated galvanic coating, load-bearing strip made of a 80 × 40 × 2.0 mm steel profile, powder-coated in ALU colour.

 

 

Mechanisms

  • For the Up&Down version – pneumatic lift.
  • For the GTS version – pneumatic lift, the PST45 base ensures the chair height adjustment.

 

 

Armrests

Integrated with the chair frame (the ARM version). Wooden armrest pads; the armrests are additionally equipped with protective pads that prevent the table top from being scratched when the chair is hung on it.
In the laminated chair version, the armrests are also laminated.